Siemens RMB795B Basic Documentation page 37

Note
Reset the
marking
Siemens
Building Technologies
the Basic configuration menu, in front of type reference "B" on operating line
"Plant type.
In addition, on operating line "Plant type changed" of the "Device information"
menu, the value is set to "Yes".
The asterisk is set automatically when leaving the Extra configuration menu,
even if nothing has been changed.
The asterisk is deleted and the value "No" appears on operating line "Plant type
changed" when, on the "Basic configuration" menu, the old or a new standard
application (i.e. basic type B) is loaded. A new configuration will be made based on
basic type "B".
Central control unit RMB795B
Commissioning
37 / 144
CE1P3122en
18.01.2012