6.14 Monitoring
Logs Menu
The Logs Menu provides information on events, trips and starter performance.
To open the Logs Menu, press ALT then LOGS while viewing the metering screens.
Trip Log
•
The Trip Log stores details of the eight most recent trips, including the date and time the trip happened. Trip 1 is the
most recent and trip 8 is the oldest stored trip.
To open the Trip Log:
1.
Press ALT then LOGS to open the Logs.
2.
Scroll to Trip Log and press
3.
Use the
and
4.
Use the
and
To close the log and return to the main display, press
Event Log
•
The Event Log stores time-stamped details of the starter's 99 most recent events (actions, warnings and trips),
including the date and time of the event. Event 1 is the most recent and event 99 is the oldest stored event.
To open the Event Log:
1.
Press ALT then LOGS to open the Logs.
2.
Scroll to Event Log and press
3.
Use the
and
To close the log and return to the main display, press
Starter Trip and Event Logger Software
•
The Starter Trip and Event Logger Software allows you to download the trip and event logs from the soft starter, for
separate analysis.
The software is compatible with all AuCom medium voltage soft starters using control software version 1.29 or later.
For further information, or to download the software, visit www.aucom.com.
Performance Counters
•
The performance counters store statistics on the starter's operation:
Hours run (lifetime and since counter last reset)
•
Number of starts (lifetime and since counter last reset)
•
•
Motor kWh (lifetime and since counter last reset)
•
Number of times the thermal model has been reset
The resettable counters (hours run, starts and motor kWh) can only be reset if the
is set to Read & Write.
To view the counters:
1.
Open the Logs Menu.
2.
Scroll to Counters and press
3.
Use the
and
4.
To reset a counter, press STORE (enter access code if required) then use the
Press STORE to confirm the action.
To close the counters and return to the main display, press the
.
buttons to select a trip to view, and press
buttons to scroll through available details.
.
buttons to select an event to view, and press
.
buttons to scroll through the counters. Press
to display details.
repeatedly.
to display details.
repeatedly.
Adjustment Lock
to view details.
repeatedly.
MVE User Manual (710-17074-00H) |
CONTROLLER
(parameter 15B)
button to select Reset.
27
Need help?
Do you have a question about the MVE Series and is the answer not in the manual?