AuCom MVE Series User Manual page 52

7P – Analog Output A
The MVE has an analog output, which can be connected to associated equipment to monitor motor performance.
Options: Current (% FLC) (default)
Motor Temperature (%)
Motor kW (%)
Motor kVA (%)
Motor pf
Voltage (%Mains)
Description: Selects which information will be reported via the analog output.
7Q – Analog A Scale
Range: 0-20 mA
4-20 mA (default)
Description: Selects the range of the analog output.
7R – Analog A Maximum Adjustment
Range: 0% - 600%
Description: Calibrates the upper limit of the analog output to match the signal measured on an external current
measuring device.
7S – Analog A Minimum Adjustment
Range: 0% - 600%
Description: Calibrates the lower limit of the analog output to match the signal measured on an external current
measuring device.
7T – Reserved
Reserved for future use.
7U – Reserved
Reserved for future use.
7V – Reserved
Reserved for future use.
7W – Reserved
Reserved for future use.
8 Display
These parameters allow the controller to be tailored to individual users' requirements.
8A – Language
Options: English (default)
Chinese
Español
Deutsch
Description: Selects which language the controller will use to display messages and feedback.
Current as a percentage of motor full load current.
Motor temperature as a percentage of the motor rated current
(calculated by the soft starter's thermal model).
Motor kilowatts. 100% is motor FLC (parameter 1A) multiplied by
mains voltage. Power factor is assumed to be 1.0.
√3 . V . I . pf
FLC
1000
Motor kilovolt amperes. 100% is motor FLC (parameter 1A)
multiplied by mains voltage.
√3 . V . I
FLC
1000
Motor power factor, measured by the soft starter.
The average voltage measured on three phases as a percentage of
the mains voltage.
Default:
Default:
Português
Français
Italiano
Russian
PROGRAMMABLE PARAMETERS
100%
0%
MVE User Manual (710-17074-00H) |
51