AuCom MVE Series User Manual page 11

SPECIFICATIONS
EMC Emission (Designed to IEC 60947-4-2)
Equipment class (EMC) ............................................................................................................................ Class A
Conducted radio frequency emission ............................................................. 0.15 MHz to 0.5 MHz: < 79 dB µV
.................................................................................................................................. 0.5 to 5 MHz: < 73 dB µV
................................................................................................................................... 5 to 30 MHz: < 73 dB µV
Radiated radio frequency emission ...................................................................... 30 to 230 MHz: < 30 dB µV/m
.............................................................................................................. 230 MHz to 1000 MHz: < 37 dB µV/m
This product has been designed as Class A equipment. Use of this product in domestic environments may cause radio
interference, in which case the user may be required to employ additional mitigation methods.
EMC Immunity (Designed to IEC 60947-4-2)
Electrostatic Discharge .................................................................. 6 kV contact discharge, 8 kV air discharge
Radio Frequency Electromagnetic Field ....................................................................... 80 to 1000 MHz: 10 V/m
Fast Transients 5/50 ns (main and control circuits) .................................... 2 kV line to earth, 1 kV line to line
Surges 1.2/50 µs (main and control circuits) ............................................... 2 kV line to earth, 1 kV line to line
Voltage dip and short time interruption (safe shutdown) ............................. 5000 ms (at 0% nominal voltage)
Certification
UL (models ≤ 4.2 kV only) .......................................................................................................... UL 347, 6
Higher ratings may be available on request.
1
Control voltage input range using an approved switch mode power supply unit with 24 VDC, 10 A (minimum) output
2
capacity.
Excludes contactors and/or circuit breakers.
3
10
| MVE User Manual (710-17074-00H)
edition
th