Displays - AuCom MVE Series User Manual

CONTROLLER
6.7

Displays

The controller displays a wide range of performance information about the soft starter. The top half of the screen
shows real-time information on current or motor power (as selected in parameter 8D). Use the
to select the information shown on the bottom half of the screen.
• Starter status
• User programmable screen
• Motor temperature
• Current
Motor power
•
• Voltage
• Last start information
Date and time
•
Performance graphs
•
• SCR conduction
Operating Feedback
NOTE
Screens shown here are with the default settings.
Starter Status
•
The starter status screen shows details of the starter's operating status, including motor current, power and
temperature.
0A
Ready
M1 000% 000.0kW
Programmable screen
•
The MVE's user-programmable screen can be configured to show the most important information for the particular
application. Use parameters 8E to 8H to select which information to display.
0A
Ready
00000 kWh 00000hrs
Motor Temperature
•
The temperature screen shows which motor data set is in use, and the temperature of the motor as a percentage of
total thermal capacity.
0A
Primary Motor Set
M1 000% M2 000%
NOTE
M2 xxx% temperature is not applicable to this product.
Current monitoring screen
•
The current screen shows real-time line current on each phase.
0A
Phase Currents (Gnd Crnt XXA)
000.0A 000.0A
Motor Power
•
The motor power screen shows motor power (kW, HP and kVA) and power factor.
0A
000.0kW 0000HP
0000kVA -. - - pf
20
| MVE User Manual (710-17074-00H)
000.0A
and buttons