Controller; Starter Status Leds; Menu Shortcuts; Displays - AuCom MVE series User Manual

CONTROLLER

7. Controller
1
2
Ready
Start
3
Exit
Logs
7.1

Starter Status LEDs

LED name On
Ready The motor is stopped and the starter is ready to start.
Run The motor is in run state (receiving full voltage).
Trip The starter has tripped.
Local The starter is in Local control mode.
If the starter is in remote control mode, the Local LED will be off.
If all LEDs are off, the starter is not receiving control voltage.
NOTE
When the Controller is powered up, the Ready LED flashes for 5 seconds as part of the initialisation routine.
7.2

Menu Shortcuts

The F1 and F2 buttons offer keyboard shortcuts to the Auto-Stop menu. Use parameters 8B and 8C (
Action
on page 56) to select the shortcut target.
7.3

Displays

The controller displays a wide range of performance information about the soft starter. The top half of the screen shows real-time
information on current or motor power (as selected in parameter 8D). Use the
shown on the bottom half of the screen.
• Starter status
• User programmable screen
Motor temperature
•
Current
•
• Motor power
• Voltage
• Last start information
Date and time
•
Performance graphs
•
• SCR conduction
30
| MVE User Manual (710-17074-00G)
Run Trip Local
LC L
Reset
Stop
RM T
4
Menu
Store
5
Alt
Tools
6
1 Four-line display for status and programming
details.
2 Status LEDs
3 Menu navigation buttons:
: Exit the menu or parameter, or cancel a
parameter change.
: Enter a menu or parameter, or save a
parameter change.
/ : Scroll to the next or previous menu
or parameter, or change the setting of the
current parameter.
4 Soft starter local control buttons
Shortcut buttons for quick access to common
5
tasks.
Alt button. Use with F1 or F2 to open
6
performance logs or commissioning tools.
Flashing
The motor is stopped and the starter is waiting for the
Restart Delay
(parameter 4M) or
Check
(parameter 4N).
The motor is starting or stopping.
The starter is in warning state.
--
8B, 8C – F1 and F2 Button
and buttons to select the information
Motor Temperature