Process Data; Overview Of Signal Types; Signal Type „0-10 V", Id0; Amount/Sign Format - WAGO I/O-SYSTEM 750 Manual

30 Table of Contents
4.3

Process Data

4.3.1

Overview of Signal Types

The following table serves as an overview of all supported signal types. The
following sections contain detailed information about the individual signal types.
The information provided in the respective tables on the resolution of the voltage
values and the raw value ranges yielded from this are based on manufacturer
scaling with user scaling disabled.
ID Signal type
0
1
4.3.2 Signal Type „0-10 V", ID0
4.3.2.1

Amount/Sign Format

For the power supply with signal type „0-10 V", the numerical range of
0x0000 ... 0x7FFF is scaled to the output voltage range of 0 V ... +10 V. The
value is mapped at a process value resolution of 0.305 mV per 1 digit.
Table 19: Process Image, Signal Type „0-10 V", Amount/Sign Format
Voltage
V
0.0
2.5
5.0
7.5
10.0
4.3.2.2

Two's Complement Representation

For the power supply with signal type „0-10 V", the numerical range of
0x0000 ... 0x7FFF is scaled to the output voltage range of 0 V ... +10 V. The
value is mapped at a process value resolution of 0.305 mV per 1 digit.
Table 20: Process Image, Signal Type „0-10 V", Two's Complement Representation
Voltage
V
0-10 V
+/- 10 V
Binary
'0000.0000.0000.0000'
'0001.1111.1111.1111'
'0011.1111.1111.1111'
'0101.1111.1111.1111'
'0111.1111.1111.1111'
Undervoltage field supply
Binary
Voltage range
0 ... +10 V
−10 ... +10 V
Numeric value
Hex.
0x0000
0x1FFF
0x3FFF
0x5FFF
0x7FFF
Numeric value
Hex.
WAGO-I/O-SYSTEM 750
750-597 8AO 0-10V/±10V DC
Voltage value resolution
2.44 mV per 1 digit
2.44 mV per 1 digit
Status
Byte Error LED
Hex.
Dec.
0 0x00
8191 0x00
16383 0x00
24575 0x00
32767 0x00
0x60
Status
Byte Error LED
Hex.
Dec.
Version 1.0.0
OFF
OFF
OFF
OFF
OFF
ON
Manual