Care And Maintenance; Replacing The Fuse - Tally Dascom 2810 User Manual

User guide
1 2

Care and maintenance

Care and maintenance
Care and maintenance
The printer is designed to operate with minimal maintenance. It is advisable to
clean the inside of the printer from time to time with a vacuum cleaner.
Before cleaning, turn off the printer, wait 5 to 10 seconds and disconnect
STOP
the power cable.
Do not oil or grease the printer, especially the sliderails and shafts.
STOP

Replacing the fuse

Replacing the fuse
100
The printer is designed to operate with minimal maintenance. It is
advisable to clean the inside of the printer from time to time with a
vacuum cleaner.
Before cleaning, turn off the printer, wait 5 to 10 seconds and
STOP
disconnect the power cable.
Do not oil or grease the printer, especially the sliderails and
STOP
shafts.
The printer is provided with a line fuse accessi-
The printer is provided with a line fuse
ble from the exterior. Press the fuse cover
accessible from the exterior. Press the
slightly inwards with a screwdriver and turn it
fuse cover slightly inwards with a
until the cover tab comes out through the re-
screwdriver and turn it until the cover tab
cess in housing. Then remove the fuse.
comes out through the recess in
housing. Then remove the fuse.
Install the fuse in reverse order of steps.
Install the fuse in reverse order of steps.
Only use the same type of fuse for
STOP
Only use the same type of fuse
replacement.
STOP
for replacement.
The fuse ratings are specified on the printer
The fuse ratings are specified on the
type plate which is mounted above the power
printer type plate which is mounted
connector on the rear:
above the power connector on the rear:
T4,00AH/250V
T6.3AH250V
Care and maintenance
User Guide
127