Serial Number (Serialn); Asset Number (Assetn) - Tally Dascom 2810 User Manual

Advanced menu
Advanced menu
Advanced menu
Advanced menu
Advanced menu

Serial number (SerialN)

Serial number (SerialN)
Serial number (SerialN)
Serial number (SerialN)
Serial number (SerialN)
With the SerialN function you have the possibility to change the 12 digit serial
number of the printer. The number can be written with any ASCII character
between hex 20 and hex 7E.
To change a digit select one character with the > or < key and press the Set (1)
key. Press < or > key to decrement or increment the selected character. When
the desired character appears press Set (1) key and the new character is stored.
After you have changed all desired digits leave the menu by pressing Exit (4) key.
This setting is not reset by loading the default factory settings.

Asset number (AssetN)

Asset number (AssetN)
Asset number (AssetN)
Asset number (AssetN)
Asset number (AssetN)
With the AssetN function you have the possibility to change the 10 digit asset
number of the printer. The number can be written with any ASCII character
between hex 20 and hex 7E.
To change a digit select one character with the > or < key and press the Set (1)
key. Press < or > key to decrement or increment the selected character. When
the desired character appears press Set (1) key and the new character is stored.
After you have changed all desired digits leave the menu by pressing Exit (4) key.
This setting is not reset by loading the default factory settings.
112
112
112
112
90
With the SerialN function you have the possibility to change the
With the SerialN function you have the possibility to change the
With the SerialN function you have the possibility to change the
With the SerialN function you have the possibility to change the
10 digit serial number of the printer. The number can be written with
10 digit serial number of the printer. The number can be written with
10 digit serial number of the printer. The number can be written with
10 digit serial number of the printer. The number can be written with
any ASCII character between hex 20 and hex 7E.
any ASCII character between hex 20 and hex 7E.
any ASCII character between hex 20 and hex 7E.
any ASCII character between hex 20 and hex 7E.
Select the SerialN (2) menu.
Select the SerialN (2) menu.
Select the SerialN (2) menu.
Select the SerialN (2) menu.
Select the SerialN (2) menu.
Setting options: 10 digits of all ASCII characters (hex 20 to 7E)
Setting options: 10 digits of all ASCII characters (hex 20 to 7E)
Setting options: 12 digits of all ASCII characters
Setting options: 10 digits of all ASCII characters (hex 20 to 7E)
Setting options: 10 digits of all ASCII characters (hex 20 to 7E)
Default setting: factory set
Default setting: factory set
(hex 20 to 7E)
Default setting: factory set
Default setting: factory set
To change a digit select one character with the > or < key and press
To change a digit select one character with the > or < key and press Default setting: factory set
To change a digit select one character with the > or < key and press
To change a digit select one character with the > or < key and press
the Set (1) key. Press < or > key to decrement or increment the se-
the Set (1) key. Press < or > key to decrement or increment the se-
the Set (1) key. Press < or > key to decrement or increment the se-
the Set (1) key. Press < or > key to decrement or increment the se-
lected character. When the desired character appears press Set (1)
lected character. When the desired character appears press Set (1)
lected character. When the desired character appears press Set (1)
lected character. When the desired character appears press Set (1)
key and the new character is stored.
key and the new character is stored.
key and the new character is stored.
key and the new character is stored.
After you have changed all desired digits leave the menu by press-
After you have changed all desired digits leave the menu by press-
After you have changed all desired digits leave the menu by press-
After you have changed all desired digits leave the menu by press-
ing the Exit (4) key.
ing the Exit (4) key.
ing the Exit (4) key.
ing the Exit (4) key.
This setting is not reset by loading the default factory settings.
This setting is not reset by loading the default factory settings.
This setting is not reset by loading the default factory settings.
This setting is not reset by loading the default factory settings.
With the AssetN function you have the possibility to change the
With the AssetN function you have the possibility to change the
With the AssetN function you have the possibility to change the
With the AssetN function you have the possibility to change the
10 digit asset number of the printer. The number can be written with
10 digit asset number of the printer. The number can be written with
10 digit asset number of the printer. The number can be written with
10 digit asset number of the printer. The number can be written with
any ASCII character between hex 20 and hex 7E.
any ASCII character between hex 20 and hex 7E.
any ASCII character between hex 20 and hex 7E.
any ASCII character between hex 20 and hex 7E.
Select the AssetN (3) menu.
Select the AssetN (3) menu.
Select the AssetN (3) menu.
Select the AssetN (3) menu.
Select the AssetN (3) menu.
Setting options: 10 digits of all ASCII characters (hex 20 to 7E)
Setting options: 10 digits of all ASCII characters (hex 20 to 7E)
Setting options: 10 digits of all ASCII characters (hex 20 to
Setting options: 10 digits of all ASCII characters (hex 20 to 7E)
Setting options: 10 digits of all ASCII characters (hex 20 to 7E)
Default setting: factory set
Default setting: factory set
7E)
Default setting: factory set
Default setting: factory set
To change a digit select one character with the > or < key and press
To change a digit select one character with the > or < key and press
Default setting: factory set
To change a digit select one character with the > or < key and press
To change a digit select one character with the > or < key and press
the Set (1) key. Press < or > key to decrement or increment the se-
the Set (1) key. Press < or > key to decrement or increment the se-
the Set (1) key. Press < or > key to decrement or increment the se-
the Set (1) key. Press < or > key to decrement or increment the se-
lected character. When the desired character appears press Set (1)
lected character. When the desired character appears press Set (1)
lected character. When the desired character appears press Set (1)
lected character. When the desired character appears press Set (1)
key and the new character is stored.
key and the new character is stored.
key and the new character is stored.
key and the new character is stored.
After you have changed all desired digits leave the menu by press-
After you have changed all desired digits leave the menu by press-
After you have changed all desired digits leave the menu by press-
After you have changed all desired digits leave the menu by press-
ing the Exit (4) key.
ing the Exit (4) key.
ing the Exit (4) key.
ing the Exit (4) key.
This setting is not reset by loading the default factory settings.
This setting is not reset by loading the default factory settings.
This setting is not reset by loading the default factory settings.
This setting is not reset by loading the default factory settings.
User Guide
User guide
User guide
User guide
User guide