View And Tear Position (Autotear) - Tally Dascom 2810 User Manual

The Menu
The Menu
The Menu
View and tear position
View and tear position
(AutoTear)
(AutoTear)

View and tear position (AutoTear)

The auto tear function or the auto view function can be selected as desired.
When auto view is switched on, the last printed text is visible. As soon as data is
received the paper moves to the "normal" print position. After printing the printer
waits for the given interval to bring the paper once more to the auto view position.
The paper is in the tear off position when auto tear is switched on, the perforation
of the paper is positioned at the tear off edge of the printer. If data is received, the
paper returns to the normal print position. After printing, the printer waits for the
given interval to bring the paper once more to the tear off position. If the tear off
edge does is not aligned with the perforation of the paper then this can be
corrected.
Paper AutoTear
Paper AutoTear
Back Next
Back Next
1 2 3
1 2 3
ViewTear=Off
ViewTear=Off
Set < > Exit
Set < > Exit
1 2 3
1 2 3
If the parameter View Tear = Off is set, the paper can still be brought into a View
or Tear position via a specific sequence (see
the Tear key.
If the parameter Tear at TOF is set, the paper perforation is automatically
positioned at the tear off edge as long as the current print position TOF is
activated. Feeding takes place after approx. 1.5 seconds (hold time). If any data
is received during this period of time the paper is not positioned at the tear off
edge. With this function it must be noted that the printer may only be switched off
when the print position is at TOF.
Confirm the setting by pressing the Set key (1). Press the Next key (4) to access
the next group of parameters.
84
84
64
The auto tear function or the auto view function can be selected as
The auto tear function or the auto view function can be selected as
desired.
desired.
When auto view is switched on, the last printed text is visible. As
When auto view is switched on, the last printed text is visible. As
soon as data is received the paper moves to the "normal" print posi-
soon as data is received the paper moves to the "normal" print posi-
tion. After printing the printer waits for the given interval to bring the
tion. After printing the printer waits for the given interval to bring the
paper once more to the auto view position.
paper once more to the auto view position.
The paper is in the tear off position when auto tear is switched on,
The paper is in the tear off position when auto tear is switched on,
the perforation of the paper is positioned at the tear off edge of the
the perforation of the paper is positioned at the tear off edge of the
printer. If data is received, the paper returns to the normal print po-
printer. If data is received, the paper returns to the normal print po-
sition. After printing, the printer waits for the given interval to bring
sition. After printing, the printer waits for the given interval to bring
the paper once more to the tear off position. If the tear off edge does
the paper once more to the tear off position. If the tear off edge does
is not aligned with the perforation of the paper then this can be cor-
is not aligned with the perforation of the paper then this can be cor-
rected.
rected.
Press AutoTear (3) key.
Press AutoTear (3) key.
Press AutoTear (3) key.
Online
Online
4
Setup
4
Setup
Use the < (2) or > (3) key to select the desired setting.
Use the < (2) or > (3) key to select the desired setting.
Use the < (2) or > (3) key to select the desired setting.
*
*
Setting Options: ViewTear=Off,
Online
Setting Options: ViewTear=Off, View=1s/3s/6s,
Setting Options: ViewTear=Off,
Online
Tear=1s/3s/6s, Tear at TOF
4
Setup
4
Default Setting: ViewTear=Off
Setup
Default Setting: ViewTear=Off
Default Setting: ViewTear=Off
If the parameter View Tear = Off is set, the paper can still be
If the parameter View Tear = Off is set, the paper can still be
brought into a View or Tear position via a specific sequence (see
brought into a View or Tear position via a specific sequence (see
page
page
If the parameter Tear at TOF is set, the paper perforation is auto-
If the parameter Tear at TOF is set, the paper perforation is auto-
matically positioned at the tear off edge as long as the current print
matically positioned at the tear off edge as long as the current print
position TOF is activated. Feeding takes place after approx. 1.5 sec-
position TOF is activated. Feeding takes place after approx. 1.5 sec-
onds (hold time). If any data is received during this period of time the
onds (hold time). If any data is received during this period of time the
paper is not positioned at the tear off edge. With this function it must
paper is not positioned at the tear off edge. With this function it must
be noted that the printer may only be switched off when the print po-
be noted that the printer may only be switched off when the print po-
sition is at TOF.
sition is at TOF.
Confirm the setting by pressing the Set key (1). Press the Next key
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
(4) to access the next group of parameters.
View=1s/3s/6s
View=1s/3s/6s
Tear=1s/3s/6s
Tear=1s/3s/6s
Tear at TOF
Tear at TOF
List of available control
153) or the Tear key.
153) or the Tear key.
User guide
User guide
User Guide
codes) or