Ip Address Administration (Ip Get M); Banner Page (Banner) - Tally Dascom 2810 User Manual

User guide
User guide
The Menu
User guide
User guide
IP address administration
IP address administration

IP address administration (IP Get M)

(IP Get M)
(IP Get M)
IP address administration
Selects the way of administrating the IP address.
IP address administration
(IP Get M)
Subnet IP Get M
(IP Get M)
Subnet IP Get M
Back Next
Back Next
Subnet IP Get M
1 2 3
Subnet IP Get M
Back Next
1 2 3
Back Next
1 2 3
1 2 3
IP Get M=DHCP
IP Get M=DHCP
Set < > Exit
Set < > Exit
IP Get M=DHCP
1 2 3
IP Get M=DHCP
Set < > Exit
1 2 3
Set < > Exit
1 2 3
1 2 3
Confirm the setting by pressing the Set key (1).
The setting Static is the precondition that the values entered in the
parameter IP Addr become valid, see
further informations, refer to the
Press the Next key (4) to access the next group of parameters.

Banner page (Banner)

Banner page (Banner)
Banner page (Banner)
Banner page (Banner)
Banner page (Banner)
Specifies whether a banner page is to be printed out, when using the LPD/LPR
protocol.
Banner=No
Banner=No
Set < > Exit
Set < > Exit
Banner=No
1 2 3
Banner=No
Set < > Exit
1 2 3
Set < > Exit
1 2 3
1 2 3
Yes: When using the LPD/LPR protocol a banner page will be printed out in front
of every print job, containing the file name and the print queue name. The width
of the banner page is 8".
Confirm the setting by pressing the Set key (1).
56
Selects the way of administrating the IP address.
Selects the way of administrating the IP address.
Selects the way of administrating the IP address.
Selects the way of administrating the IP address.
Press IP Get M (3) key.
Press IP Get M (3) key.
Press IP Get M (3) key.
Online
Press IP Get M (3) key.
Online
Press IP Get M (3) key.
4
Setup
Online
4
Setup
Online
4
Setup
4
Setup
Use the < (2) or > (3) key to select the desired setting.
Use the < (2) or > (3) key to select the desired setting.
Use the < (2) or > (3) key to select the desired setting.
*
*
Setting Options: Static, DHCP, BOOTP
Online Setting Options: Static, DHCP, BOOTP
Use the < (2) or > (3) key to select the desired setting.
Setting Options: Static, DHCP, BOOTP
Online
Default Setting: DHCP
Use the < (2) or > (3) key to select the desired setting.
*
Default Setting: DHCP
Default Setting: Static
4
*
Setting Options: Static, DHCP, BOOTP
Setup
Online
4
Confirm the setting by pressing the Set key (1).
Setting Options: Static, DHCP, BOOTP
Setup
Online
Default Setting: DHCP
Confirm the setting by pressing the Set key (1).
Default Setting: DHCP
4
Setup
4
Confirm the setting by pressing the Set key (1).
Setup
Confirm the setting by pressing the Set key (1).
The setting Static is the precondition that the values entered in
The setting Static is the precondition that the values entered in
the parameter IP Addr become valid (see
the parameter IP Addr become valid (see
Addr)
The setting Static is the precondition that the values entered in
Addr)
The setting Static is the precondition that the values entered in
Panel Manual
the parameter IP Addr become valid (see
Panel Manual
the parameter IP Addr become valid (see
Addr)
Press the Next key (4) to access the next group of parameters.
Addr)
Panel Manual
Press the Next key (4) to access the next group of parameters.
Panel Manual
Specifies whether a banner page is to be printed out, when using the
Press the Next key (4) to access the next group of parameters.
Specifies whether a banner page is to be printed out, when using the
Press the Next key (4) to access the next group of parameters.
LPD/LPR protocol.
LPD/LPR protocol.
Specifies whether a banner page is to be printed out, when using the
Specifies whether a banner page is to be printed out, when using the
Press Banner (2) key.
LPD/LPR protocol.
Press Banner (2) key.
LPD/LPR protocol.
Press Banner (2) key.
Press Banner (2) key.
Press Banner (2) key.
Use the < (2) or > (3) key to select the desired setting.
* Use the < (2) or > (3) key to select the desired setting.
*
Setting Options: Yes/No
Online
Use the < (2) or > (3) key to select the desired setting.
Setting Options: Yes/No
Online
Use the < (2) or > (3) key to select the desired setting.
Default Setting: No
Use the < (2) or > (3) key to select the desired setting.
*
Default Setting: No
4
*
Setting Options: Yes/No
Setup
Online
4 Setting Options: Yes/No
Yes: When using the LPD/LPR protocol a banner page will be prin-
Setting Options: Yes/No
Setup
Online
Default Setting: No
Yes: When using the LPD/LPR protocol a banner page will be prin-
Default Setting: No
ted out in front of every print job, containing the file name and the
Default Setting: No
4
ted out in front of every print job, containing the file name and the
Setup
print queue name. The width of the banner page is 8".
4
Yes: When using the LPD/LPR protocol a banner page will be prin-
Setup
print queue name. The width of the banner page is 8".
Yes: When using the LPD/LPR protocol a banner page will be prin-
ted out in front of every print job, containing the file name and the
Confirm the setting by pressing the Set key (1).
ted out in front of every print job, containing the file name and the
print queue name. The width of the banner page is 8".
Confirm the setting by pressing the Set key (1).
print queue name. The width of the banner page is 8".
Confirm the setting by pressing the Set key (1).
Confirm the setting by pressing the Set key (1).
(page 73). For further informations, refer to the
Setting IP address (IPv4
(page 73). For further informations, refer to the
on the Online-CD-ROM.
Web Panel Manual
on the Online-CD-ROM.
(page 73). For further informations, refer to the
(page 73). For further informations, refer to the
on the Online-CD-ROM.
on the Online-CD-ROM.
User Guide
Setting IP address (IP
Setting IP address (IP
Addr). For
Setting IP address (IP
on the Online-CD-ROM.
Setting IP address (IP
The Menu
The Menu
The Menu
The Menu
Web
Web
Web
Web
75
75
75
75