Calling Up The Menu; Menu Configurations - Tally Dascom 2810 User Manual

User Guide

Calling up the menu

You can access the menu in the following way:
Adjust Paperway
Menu Char
3
1 2

Menu configurations

Every printer is shipped with factory default settings. Basic settings such as
emulation, character size, form length etc., which many applications make use of,
are set. At the end of this chapter you will find a menu printout which shows you
the printer's default settings.
Your printer allows you to set and use five independent menu configurations.
If one of your applications for example requires an IBM printer while another
program works better with an EPSON printer, you can set an IBM emulation
configuration with the desired settings, and set the second configuration as an
EPSON emulation.
The active menu is always the one you used last. When you switch on the printer
for the very first time, menu no. 1 is loaded. Menu no. 1 only remains active until
you load another menu. The last active menu is stored even after the printer is
switched off and is reloaded automatically when the printer is switched on again.
For example, to change from menu no. 1 to menu no. 3:
Online Trac1
Tear
1 2 3
Adjust Paperway
Menu Char
1 2 3
Print Menu
Back Next
1 2 3
Press the Setup key. The printer switches to Setup mode.
(can be selected both in the Online and Offline mode). To
Online
access the printer menu, press the key directly underneath
4
the word Menu (1).
Setup
Press Setup key.
Online
4
Setup
Press Menu (1) key.
Online
4
Setup
Press Menu (3) key.
Online
4
Setup
Now the following message appears in the LC display:
The Menu
37