Paper Parameters (Paper); Form Length (Forml) - Tally Dascom 2810 User Manual

Paper parameters (Paper)

Paper parameters (Paper)
User Guide
User guide
Paper AutoTear
Paper parameters (Paper)
Paper AutoTear
Back Next
Paper parameters (Paper)
Back Next
Selects the paper parameters Formlen (form length), FormAdj (first printing
1 2 3
position) and Head (printhead gap, only if AGA=Off) separately for each paper
1 2 3
source in the current menu.
Non-installed and with the parameter PapOpt activated options cannot be
selected.
Paper AutoTear
Back Next
1 2 3
Trac1
Select the desired paperway, in our example Trac1 (2). Press Next (4) key, to
proceed to the installed optional paperways.

Form length (Forml)

Form length (Forml)
Form length (Forml)
You can define the form length in one of two ways: via the number of lines or via
standard formats (e.g. DIN A4).
Forml FormAdj
Forml FormAdj
Back Next
Back Next
1 2 3
1 2 3
Form length (Forml)
Lines Standard
Lines Standard
Back Next
Back Forml FormAdj Next
1 2 3
Back Next
The Menu
1 2 3
1 2 3
6 LPI =72
Set < > Exit
Lines Standard
1 2 3
Back Next
1 2 3
Lines Standard
Back Next
Selects the paper parameters Formlen (form length), FormAdj (first
Selects the paper parameters Formlen (form length), FormAdj (first
printing position) and Head (printhead gap, only if AGA=Off) sepa-
printing position) and Head (printhead gap, only if AGA=Off) sepa-
rately for each paper source in the current menu.
rately for each paper source in the current menu.
Non-installed and with the parameter PapOpt activated options can-
Non-installed and with the parameter PapOpt activated options can-
not be selected.
not be selected.
Press Paper (2) key.
Press Paper (2) key.
Online
Selects the paper parameters Formlen (form length), FormAdj (first
Online
printing position) and Head (printhead gap, only if AGA=Off) sepa-
4
Setup
4
rately for each paper source in the current menu.
Setup
Non-installed and with the parameter PapOpt activated options can-
not be selected.
You can now choose between the following paper options:
You can now choose between the following paper options:
` Tractor 1
Press Paper (2) key.
` Tractor 1 Press Paper (2) key.
` ASF-F (Single sheet feeder front, option)
Online
` ASF-F (Single sheet feeder front, option)
` ASF-1/2 (Single sheet feeder rear, option)
` ASF-1/2 (Single sheet feeder rear, option)
4
Setup
` Tractor 2 (front, option)
` Tractor 2 (front, option)
The Single menu option does not apply to this printer
You can now choose between the following paper options:
The Single menu option does not apply to this printer
You can now choose between the following paper options:
► Tractor 1
` Tractor 1
► Tractor 2 (front, option)
The single sheet feeders front (ASF-F) and rear (ASF-1/2 with
` ASF-F (Single sheet feeder front, option)
The single sheet feeders front (ASF-F) and rear (ASF-1/2 with
two bins) are available as options for some printer models
two bins) are available as options for some printer models
` ASF-1/2 (Single sheet feeder rear, option)
only.
only.
` Tractor 2 (front, option)
Select the desired paperway, in our example Trac1 (2). Press
Select the desired paperway, in our example Trac1 (2). Press
Next (4) key, to proceed to the installed optional paperways.
Next (4) key, to proceed to the installed optional paperways.
The Single menu option does not apply to this printer
You can define the form length in one of two ways: via the number
You can define the form length in one of two ways: via the number
of lines or via standard formats (e.g. DIN A4).
of lines or via standard formats (e.g. DIN A4).
The single sheet feeders front (ASF-F) and rear (ASF-1/2 with
two bins) are available as options for some printer models
Press Forml (2) key.
Press Forml (2) key.
Press Forml (2) key.
only.
Online
Online
Select the desired paperway, in our example Trac1 (2). Press
4
Next (4) key, to proceed to the installed optional paperways.
Setup
4
Setup
You can define the form length in one of two ways: via the number
of lines or via standard formats (e.g. DIN A4).
If you wish to define the form length via a line format, press Line (2)
If you wish to define the form length via a line format, press
If you wish to define the form length via a line format, press Line (2)
key.
Line (2) key.
Press Forml (2) key. key.
Online
Online
4
Online
Setup
4
Setup
4
Setup
Use the < (2) or > (3) key to select the desired setting.
Use the < (2) or > (3) key to select the desired setting.
*
Setting Options: 6 to 144
Online
Setting Options: 6 bis 144
If you wish to define the form length via a line format, press Line (2)
Default Setting: 72
4 Default Setting: 72
key.
Setup
Online
Sets the form length via line formats. Please note that the adjust-
ment in Lines depends on the selected LPI. For example 8 LPI at a
4
Setup
selected line number of 96 lines results in a formlength of 12 inches
(96 lines/[8lines/inch]) = 12 inches). The selectable range is be-
tween 3 and 21 inches, i.e. for 2 LPI from 6 to 42 lines and for 12 LPI
from 24 to 262 lines.
If the form length is set it will not be changed by changing the LPI
later on.
Confirm the setting by pressing the Set key (1).
If you wish to define the form length via standard formats, press
Standard (3) key.
Online
The Menu
The Menu
User guide
81
81
81
81
61