Tally Dascom 2810 User Manual page 35

User Guide
Do not tension the paper excessively to avoid tearing the perforation holes;
do not allow excessive slack since in this case the paper will bulge and
there may be problems in the feeding process.
1
Large Character Printing
Release the coloured latch lever of the
lefthand tractor and align the tractor so
that the first printing position on the
paper matches the X mark on the printer
housing.
Lock the coloured lever again.
Place fanfold paper into the left-hand
tractor.
Open the coloured latch lever of the
right-hand tractor and align it to the
paper width.
Insert the fanfold paper into the right-
hand tractor.
Make sure that it is inserted by the same
length as on the left-hand tractor in
order to avoid any paper jam.
Close the tractor flap and lock the tractor
by turning the tractor lever to the rear.
Paper handling
27