Skiping Perforation (Skip); Selecting Start Signal For Escape Sequence (Escchar) - Tally Dascom 2810 User Manual

The Menu
User guide
User guide
User guide

Skiping perforation (Skip)

User guide Skiping perforation (Skip)
Skiping perforation (Skip)
Skips the perforation; 7 different values (in inches) can be defined.
Skiping perforation (Skip)
Skiping perforation (Skip)
LPI Skip
LPI Skip
Back Next
Back Next
LPI Skip
1 2 3
LPI Skip
Back Next
1 2 3
Back Next
3
1 2
1 2 3
Skip= 0.0 Inch *
Skip= 0.0 Inch *
Set < > Exit
Set < > Exit
Skip= 0.0 Inch *
1 2 3
Skip= 0.0 Inch *
Set < > Exit
3
1 2
Set < > Exit
1 2 3
3
1 2
Confirm the setting by pressing the Set key (1). Press the Next key (4) to access
the next group of parameters.
Selecting start signal for
Selecting start signal for
escape sequence
escape sequence

Selecting start signal for escape sequence (ESCChar)

Selecting start signal for
(ESCChar)
Selecting start signal for
(ESCChar)
escape sequence
Selects the start signal for control sequences. Setting ESC: Only character
escape sequence
(ESCChar)
Escape can be used. Setting ESC+$$: Character Escape or alternatively two $
(ESCChar)
characters
ESCChar Emulate
ESCChar Emulate
($$) can be used. For more information see the section
Back Next
Back Next
ESCChar Emulate
1 2 3
ESCChar Emulate
Back Next
1 2 3
Back Next
1 2 3
1 2 3
ESCChar=ESC
ESCChar=ESC
Set < > Exit
Set < > Exit
ESCChar=ESC
1 2 3
ESCChar=ESC
Set < > Exit
1 2 3
Set < > Exit
1 2 3
1 2 3
Confirm the setting by pressing the Set key (1).
46
Skips the perforation; 7 different values (in inches) can be defined.
Skips the perforation; 7 different values (in inches) can be defined.
Press Skip (3) key.
Skips the perforation; 7 different values (in inches) can be defined.
Press Skip (3) key.
Skips the perforation; 7 different values (in inches) can be defined.
Press Skip (3) key.
Online
Press Skip (3) key.
Online
Press Skip (3) key.
4
Setup
Online
4
Setup
Online
4
Setup
4
Setup
Use the < (2) or > (3) key to select the desired setting.
Use the < (2) or > (3) key to select the desired setting.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: 0.0 to 3.5 Inch in steps of 0.5 inch
Online
Setting Options: 0.0 to 3.5 Inch in steps of 0.5 inch
Use the < (2) or > (3) key to select the desired setting.
Setting Options: 0.0 to 3.5 Inch in steps of 0.5 inch
Online
Default Setting: 0.0 Inch
Use the < (2) or > (3) key to select the desired setting.
Default Setting: 0.0 Inch
4 Default Setting: 0.0 Inch
Setting Options: 0.0 to 3.5 Inch in steps of 0.5 inch
Setup
Online
4
Confirm the setting by pressing the Set key (1). Press the Next key
Setting Options: 0.0 to 3.5 Inch in steps of 0.5 inch
Setup
Online
Default Setting: 0.0 Inch
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Default Setting: 0.0 Inch
4
(4) to access the next group of parameters.
Setup
4
Confirm the setting by pressing the Set key (1). Press the Next key
Setup
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
(4) to access the next group of parameters.
Selects the start signal for control sequences. Setting ESC: Only
Selects the start signal for control sequences. Setting ESC: Only
character Escape can be used. Setting ESC+$$: Character Escape
character Escape can be used. Setting ESC+$$: Character Escape
or alternatively two $ characters ($$) can be used. For more infor-
Selects the start signal for control sequences. Setting ESC: Only
or alternatively two $ characters ($$) can be used. For more infor-
Selects the start signal for control sequences. Setting ESC: Only
mation see the section
character Escape can be used. Setting ESC+$$: Character Escape
mation see the section
character Escape can be used. Setting ESC+$$: Character Escape
or alternatively two $ characters ($$) can be used. For more infor-
or alternatively two $ characters ($$) can be used. For more infor-
Press ESCChar (2) key.
mation see the section
Press ESCChar (2) key.
mation see the section
Online
Press ESCChar (2) key.
Online
Press ESCChar (2) key.
Press ESCChar (2) key.
4
Setup
Online
4
Setup
Online
4
Setup
4
Setup
Use the < (2) or > (3) key to select the desired setting.
Use the < (2) or > (3) key to select the desired setting.
*
*
Setting Options: ESC/ESC+$$
Online
Setting Options: ESC/ESC+$$ Use the < (2) or > (3) key to select the desired setting.
Online
Use the < (2) or > (3) key to select the desired setting.
Default Setting: ESC
Use the < (2) or > (3) key to select the desired setting.
*
Default Setting: ESC
4
*
Setting Options: ESC/ESC+$$
Setup
Online
4 Setting Options: ESC/ESC+$$
Confirm the setting by pressing the Set key (1).
Setting Options: ESC/ESC+$$
Setup
Online
Default Setting: ESC Confirm the setting by pressing the Set key (1).
Default Setting: ESC
4 Default Setting: ESC
Setup
4
Confirm the setting by pressing the Set key (1).
Setup
Confirm the setting by pressing the Set key (1).
The $$ procedure (page
The $$ procedure (page
The $$ procedure (page
The $$ procedure (page
The $$
User Guide
The Menu
The Menu
The Menu
The Menu
146).
146).
146).
146).
procedure.
65
65
65
65