Pjl Commands - Tally Dascom 2810 User Manual

Emulations

PJL commands

The following PJL commands can be used either with the internal Ethernet
interface or with a TallyCom III interface (or compatible).
This functionality may be activated via the parameter Jobcntl in the Advanced
Menu.
Sequence
"ESC"%-12345X@PJL
@PJL ECHO
@PJL EOJ
@PJL EOJ NAME=
@PJL INFO STATUS
@PJL INFO CONFIG
@PJL INFO VARIABLES
@PJL INFO MEMORY
@PJL USTATUS DEVICE = ON
@PJL USTATUS DEVICE = OFF
@PJL USTATUS DEVICE = VERBOSE
@PJL USTATUS JOB = ON
@PJL USTATUS JOB = OFF
@PJL USTATUS PAGE = ON
@PJL USTATUS PAGE = OFF
@PJL USTATUSOFF
@PJL JOB NAME =
@PJL JOB FILE =
@PJL JOB START =
@PJL JOB END =
@PJL JOB COPY =
@PJL ENTER LANGUAGE
@PJL INFO USTATUS
@PJL USTATUS TIMED
132
Brief description
Universal Exit Language (UEL) commands
ECHO command
EOJ (End of Job) commands
INFO (Information Request) command
INFO of the printer configuration
INFO of variables which can be set by SET
INFO about the memory of the printer
USTATUS (unsolicited status) commands
JOB (Start of Job) commands
Exit PJL and start normal parser
List each type of unsolicited status
Enables timed unsolicited status
User Guide