Setting For Printing Copy Paper (Hvyform); Automatic Paper Width Detection (Apw) - Tally Dascom 2810 User Manual

Advanced menu
Setting for printing copy

Setting for printing copy paper (HvyForm)

paper (HvyForm)
Advanced menu
If you set HvyForm = ON, the printer prints the same line twice at double strike.
Advanced menu
This setting ensures that copy paper produces optimum results.
HvyForm
Power save mode
Power save mode GrSpeed HvyForm
Back Next
(Sleepmod)
Back Next
(Sleepmod)
1 2 3
1 2 3
SleepMod
SleepMod
Back Next
Back Next
HvyForm=Off
Set < > Exit
1 2 3
SleepMod=On
SleepMod=On
Set < > Exit
Set < > Exit
With the Copy Draft, NLQ and LQ print qualities, the line is printed twice,
1 2 3
however, at single strike.
1 2 3
Confirm the setting by pressing the Set (1) key. Change to the next parameter
group with the Next key (4).
Automatic paper width
Automatic paper width

Automatic paper width detection (APW)

detection (APW)
detection (APW)
The automatic paper width detection feature APW prevents the printer from
printing beyond the paper edge. This is useful to prevent the printer from printing
on the platen, for example, because of an incorrect driver setting.
APW AED
APW AED
Back Next
Back Next
1 2 3
1 2 3
APW=On
APW=On
Set < > Exit
Set < > Exit
1 2 3
1 2 3
If APW=On, the printer is in the standard mode and truncates all data located
beyond the right-hand and left-hand paper edge. These print data are lost.
When you select APW=Off, the printer does not prevent undesirable printing on
the platen.
The printer determines the paper width by means of an optical sensor in the print
head module. The print head carriage moves once across the maximum possible
printable area of the paper and stores the width measured in this process. The
measuring process varies, depending on the paper source selected.
88
110
110
Paper with a completely black back side cannot be used if the
ink is carbon-based. However, the printer can handle aniline-
based black paper (undefined colors).
Confirm the setting by pressing the Set (1) key. Change to the next
parameter group with the Next key (4).
If you set HvyForm = ON, the printer prints the same line twice at
double strike. This setting ensures that copy paper produces opti-
mum results.
Select the HvyForm menu (3).
Select the HvyForm menu (3).
If the parameter Sleepmod is activated, the printer switches to en-
If the parameter Sleepmod is activated, the printer switches to en-
Online
ergy-saving mode after 10 minutes of inactivity (<20 W).
Online
ergy-saving mode after 10 minutes of inactivity (<20 W).
4
Setup
4
Select the Sleepmod (3) menu.
Setup
Select the Sleepmod (3) menu.
Online
Online
Setting options:
Setting options: On/Off
*
Setup
Default setting:
Setup
Online
Default setting: Off
4
Setup
Setting options: On/Off
Setting options: On/Off
*
Default setting:
*
Default setting:
Confirm the setting by pressing the Set (1) key. Change to the next
Online
Online
parameter group with the Next key (4).
4
Setup
4
Confirm the setting by pressing the Set (1) key. Change to the next
Setup
Confirm the setting by pressing the Set (1) key. Change to the next
parameter group with the Next key (4).
parameter group with the Next key (4).
The automatic paper width detection feature APW prevents the prin-
The automatic paper width detection feature APW prevents the prin-
ter from printing beyond the paper edge. This is useful to prevent the
ter from printing beyond the paper edge. This is useful to prevent the
printer from printing on the platen, for example, because of an incor-
printer from printing on the platen, for example, because of an incor-
rect driver setting.
rect driver setting.
Select the APW (2) menu.
Select the APW (2) menu.
Select the APW (2) menu.
Online
Online
4
Setup
4
Setup
Setting options: On/Off
Setting options: On/Off
Setting options: On/Off
*
Default setting:
*
Default setting:
Online
Default setting: On
Online
If APW=On, the printer is in the standard mode and truncates all
If APW=On, the printer is in the standard mode and truncates all
4
data located beyond the right-hand and left-hand paper edge. These
Setup
4
data located beyond the right-hand and left-hand paper edge. These
Setup
print data are lost.
print data are lost.
When you select APW=Off, the printer does not prevent undesirable
When you select APW=Off, the printer does not prevent undesirable
printing on the platen.
printing on the platen.
The printer determines the paper width by means of an optical sen-
The printer determines the paper width by means of an optical sen-
sor in the print head module. The print head carriage moves once
sor in the print head module. The print head carriage moves once
across the maximum possible printable area of the paper and stores
across the maximum possible printable area of the paper and stores
the width measured in this process. The measuring process varies,
the width measured in this process. The measuring process varies,
depending on the paper source selected.
depending on the paper source selected.
The measurement is made
The measurement is made
` after power-on and before the first print job;
` after power-on and before the first print job;
` after paper end and before the subsequent print job; after
` after paper end and before the subsequent print job; after
` changing the paper source (e.g. from Tractor 1 to Tractor 2).
` changing the paper source (e.g. from Tractor 1 to Tractor 2).
On/Off
Off
With the Copy Draft, NLQ and LQ print qualities, the line
is printed twice, however, at single strike.
On
On
On
On
User Guide
User guide
User guide
109