Menu Parameters; Printing Out Menu Configurations (Print); Loading Menu Configurations (Menu) - Tally Dascom 2810 User Manual

The Menu
User guide

Menu parameters

Menu parameters
The following section introduces and explains all the possible menu settings.
Online Trac1
Tear
Online Trac1
Tear
1 2 3
1 2 3
Adjust Paperway
Menu Char
Adjust Paperway
1 2 3
Menu Char
1 2 3

Printing out menu configurations (Print)

Printing out menu
Prints the menu configurations using the active paper feed; see
configurations (Print)
(example).
Print Menu
Back Next
1 2 3

Loading menu configurations (Menu)

Loading menu
A menu is loaded, you can choose between five menus; see
configurations (Menu)
Print Menu
Back Next
Print Menu
Back Next
1 2 3
1 2 3
Load Menu=1
Set < > Exit
Load Menu=1
Set < > Exit
1 2 3
1 2 3
Confirm the setting by pressing the Set key (1). Press the Next key (4) to access
the next group of parameters.
42
The following section introduces and explains all the possible menu
settings.
Press Setup key.
Press Setup key.
Online
Online
4
Setup
4
Setup
Press Menu (1) key.
Online Press Menu (1) key.
4
Online
Setup
printer to enable menu mode. If you want to enable
4
access to this mode permanently, you need to change
Setup
the appropriate setting in the menu; see
(MenLock).
Prints the menu configurations using the active paper feed; see
Menu settings (example) (page
Press Print (2) key, to start the printout.
Press Print (2) key, to start the printout.
Online
4
Setup
A menu is loaded, you can choose between five menus; see
handling (page
Press Menu (3) key.
Press Menu (3) key.
Online
Online
4
Setup
4
Setup
Use the < (2) or > (3) key to select the desired setting.
*
Use the < (2) or > (3) key to select the desired setting.
Online
*
Setting Options: Load Menu=1/2/3/4/5
Setting Options: Load Menu=1/2/3/4/5
Online
4
Default Setting: Load Menu=1
Setup
Default Setting: Load Menu=1
4
Setup
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Setup mode and Menu mode may be disabled.
Setup mode and Menu mode may be disabled. Hold
Hold down the Setup key while switching on the
down the Setup key while switching on the printer to
enable menu mode. If you want to enable access to this
mode permanently, you need to change the appropriate
setting in the menu; see
57).
User Guide
Menu lock
Menu lock (MenLock) (page
Menu settings
93).
Menu handling.
The Menu
80).
Menu
61