View And Tear Position (Autotear) - Tally Dascom 2810 User Manual

User Guide

View and tear position (AutoTear)

The auto tear function or the auto view function can be selected as desired.
When auto view is switched on, the last printed text is visible. As soon as data is
received the paper moves to the "normal" print position. After printing the printer
waits for the given interval to bring the paper once more to the auto view position.
The paper is in the tear off position when auto tear is switched on, the perforation
of the paper is positioned at the tear off edge of the printer. If data is received, the
paper returns to the normal print position. After printing, the printer waits for the
given interval to bring the paper once more to the tear off position. If the tear off
edge does is not aligned with the perforation of the paper then this can be
corrected.
If the parameter View Tear = Off is set, the paper can still be brought into a View
or Tear position via a specific sequence (see List of available control codes) or
the Tear key.
If the parameter Tear at TOF is set, the paper perforation is automatically
positioned at the tear off edge as long as the current print position TOF is
activated. Feeding takes place after approx. 1.5 seconds (hold time). If any data
is received during this period of time the paper is not positioned at the tear off
edge. With this function it must be noted that the printer may only be switched off
when the print position is at TOF.
Confirm the setting by pressing the Set key (1). Press the Next key (4) to access
the next group of parameters.
Press AutoTear (3) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: ViewTear=Off, View=1s/3s/6s,
Tear=1s/3s/6s, Tear at TOF
Default Setting: ViewTear=Off
Options and accessories
79