Table of Contents
Advertisement
5.6.
WAN Login
In WAN mode, after you logged in, the interface is shown as below. See Figure 5.6
Please refer to the following contents for LAN and WAN login difference.
•
In the WAN mode, system opens the sub stream of all channels to monitor by default.
•
You can select different channels and different monitor modes at the bottom of the interface.
Important
The window display mode and the channel number are by default. For example, for the 16-channel,
the max window split mode is 16.
•
Multiple-channel monitor, system adopts extra stream to monitor by default. Double click
one channel, system switches to single channel and system uses main stream to monitor. You
can view there are two icons at the left top corner of the channel number for you reference.
M stands for main stream. S stands for sub stream (extra stream).
•
If you login via the WAN mode, system does not support alarm activation to open the video
function in the Alarm setup interface.
Figure 5.6
78
Advertisement
Table of Contents
