Table of Contents
Advertisement
Parameter
Stop bit
Parity
5.9.5.4.
Note:
•
For the character in the following user name or the user group name, system max supports 6-digits.
The space in the front or at the end of the string is null. The valid string includes: character, number,
and underline.
•
The user amount default setup is 64 and the group amount default setup is 20. The factory default
setup includes two levels: user and admin. You can set the corresponding group and then set the
rights for the respective user in the specified groups.
•
User management adopts group/user modes. The user name and the group name shall be unique.
One user shall be included in only one group.
5.9.5.4.1.
In this interface you can add/remove user and modify user name. See Figure 5.47.
Add user: It is to add a name to group and set the user rights. See Figure 5.48. There are two default users:
admin (password: admin) and hidden user "default". Hidden user "default" is for system interior use only
and cannot be deleted. When there is no login user, hidden user "default" automatically login. You can set
some rights such as monitor for this user so that you can view some channel view without login. Here you
can input the user name and password and then select one group for current user.
Default setup is 1. Please set according to the speed dome dial switch setup.
Default setup is none. Please set according to the speed dome dial switch
setup.
Account
User
Function
Figure 5.47
117
Advertisement
Table of Contents
