Status Bar; Login Dvr; Tool Bar (Please Take Actual Machine Model As Quasi) - CP Plus 4/8/16 Channel DVR User Manual

output device is connected to this channel, you can monitor both audio and video feeds.
To display a full-screen view of a single channel, press the corresponding numerical or
positional buttons ( / ) on the remote control (the
channel number is displayed in the top left corner of each window); alternatively, you can do so
by left double-clicking on the desired window.
In order to return to the multi-screen view, either double-click on the screen again or press the
single-/multiple-view button either on the remote control or the front panel of the DVR.
You can choose to display the status bar and or toolbar, or to hide them by right-clicking on the
screen. These three options alternate in sequence.

4.1.2 Status Bar

Located at the bottom of the screen, the Status Bar can be displayed by pressing the "Menu"
button or right-clicking anywhere on the screen.
System time Approximate Remaining Hours of HDD recording

4.1.3 Login DVR

In live view, press the " " button twice or double-click the right key of the mouse in live
view to display the tool bar. The login window will appear
if the password is enabled.
You can log in from the "LOGIN" window as shown in the
adjacent figure. Select a user name and password via
numeric keyboard. You can access the main menu by
pressing " " if the password is enabled.
1． The default password for Admin is "888888" and the default password for user1 is "666666".
For your convenience and system safety, you can change password of Admin and add another
username.
2．The Device ID is used for connecting the Internet Explorer interface. For detailed
instructions please refer to Appendix 9.
4.1.4 Tool Bar
(Please take actual machine model as quasi)
After logging in system, double-click the right-hand mouse button, and it will display the
following toolbar.
19