Table of Contents
Advertisement
4.1.3.4.3.
Set the e-mail addresses for DVR (WITHOUT HDD) sent and received alarm alert information. Email
interface is shown as in Figure 4.26.
➢ [Enable] To enable or disable email service.
➢ [SMTP Server] Input Email SMTP Server address.
➢ [Port] Input SMTP server service port number.
➢ [SSL] To enable or disable SSL encryption.
➢ [User Name] Input the user name of sender Email Box.
➢ [Password] Input the Password for the user name of sender Email Box.
➢ [Sender] Input the sender EMAIL address.
➢ [Receiver] You can set up to three e-mail address, separated by a semicolon, can outbox
the same e-mail address.
➢ [Title] Subject of the message, you can set your own.
➢ [Test Mail] Click here to verify above setting.
4.1.3.4.4.
FTP
FTP is used when there is an alarm generated, or the alarm linkage video, then user can upload
to a specified FTP server specific video. FTP interface is shown as in Figure 4.27
Figure 4.26
49
Advertisement
Table of Contents
