Table of Contents
Advertisement
•
[Period] You can also set the alarm time from Monday to Sunday every day 4 time periods,
other time will not trigger motion detection alarm information. See Figure 4.15
•
[Interval] between two alarms generate alarm information shortest time interval can be set
between 0 and 600Sec.
•
[Record channel] When an alarm is triggered, the camera starts recording, you need to
open detection recording.
•
[Tour] Here you can enable tour function when alarm occurs. System one-window tour.
•
[PTZ Activation] Here you can set PTZ movement when an alarm occurs. Such as go to
preset, tour &pattern when there is an alarm. Click "Setup" button, you can see an
interface is shown as in Figure 4.16 .
Figure 4.14
Figure 4.15
41
Advertisement
Table of Contents
