Table of Contents
Advertisement
5.3.
LAN Mode
For the LAN mode, after you logged in, you can see the main window. See Figure 5.4
This main window can be divided into the following sections.
⚫
Section 1: There are five function buttons: Preview, Playback, Alarm, Setup, Info, and Logout.
⚫
Section 2: There are channel numbers to open
⚫
Section 3: There are two function buttons: Open All to access all cameras and Close all to close all
cameras.
⚫
Section 4: User can click this button to enable audio talk. After you enable the bidirectional talk, the
Start talk button becomes Stop Talk button and it becomes Red.
Note - if audio input port from the device to the client-end is using the first channel audio input port.
During the bidirectional talk process, system will not encode the audio data from the 1-channel.
⚫
Section 5: User can click this to enable manual record for all channels.
⚫
Section 6: Instant record button. Click it, the button becomes Red and system begins manual record.
Click it again, system restores previous record mode.
⚫
Section 7: PTZ operation panel.
⚫
Section 8: Image setup, see in Figure 5.5.
Figure 5.4
76
Advertisement
Table of Contents
