Table of Contents
Advertisement
Please refer to the following sheet for detailed information.
Parameter
Enable
SMTP Server
Port
SSL
User Name
Password
Sender
Subject
Receiver
5.9.2.8.
The FTP interface is shown as in Figure 5.25. It is to set FTP IP, port and etc. for remote storage.
Function
Please check the box here to enable email function.
Input server address and then enable this function.
Default value is 25. You can modify it if necessary.
To enable or disable SSL encryption.
The user name of the sender email account.
The password of sender email account.
Sender email address.
Input email subject here.
Input receiver email address here. Max three addresses.
FTP
Figure 5.25
97
Advertisement
Table of Contents
