Table of Contents
Advertisement
Please refer to the following sheet for detailed information.
Parameter
Network type
ISP
Wireless AP
Dial No.
User Name
Password
WLAN Status
5.9.2.5.
The PPPoE interface is shown as in Figure 5.22.
Input the PPPoE user name and password you get from the IPS (internet service provider) and enable
PPPoE function. Please save current setup and then reboot the device to get the setup activated.
Device connects to the internet via PPPoE after reboot. You can get the IP address in the WAN from
the IP address column.
Please note, you need to use previous IP address in the LAN to login the device. Please go to the IP
address item to via the device current device information. You can access the client-end via this
new address.
Here you can select 3G network type to distinguish the 3G module
from different ISP. The types include WCDMA，CDMA1x and etc.
To Select ISP predefine Setting for APN, Dial No. User and Password.
It includes TATA, AIRCEL, AIRTEL, MTS, BSNL, RELIANCE CDMA,
RELIANCE GSM, TATA DOCOMO, MTNL and customized.
To input 3G access point.
Input 3G dialup number.
Input Dial 3G username
Input dial user's password
The IP address of the dial-up number to get.
PPPoE
Function
94
Advertisement
Table of Contents
