Table of Contents
Advertisement
4.1.4. Storage
4.1.4.1.
Schedule
You need to have proper rights to implement the following operations. Please make sure the HDDs
have been properly installed.
After the system booted up, it is in default 24-hour regular mode. You can set record type and time
in schedule interface as shown in Figure 4.34.
➢
[Channel] Please select the channel number first. You can select "all" if you want to set for the
whole channels.
➢
[Redundancy] System supports redundancy backup function. You can highlight Redundancy
button to activate this function. Please note, before enable this function, please set at least
one HDD as redundant. (Main Menu →Storage → HDD Manager). Please note this function is
null if there is only one HDD.
➢
[Rec Duration] Here we can define maximum length of recorded file in HDD. It could be 1 ~ 120
Min.
➢
[Pre Rec] Here we can define the pre-record time before the event occurs into the file. It could
be 0 ~ 30Sec.
➢
[Mode] Here we can select recording mode like Schedule and Manual or we can stop recording
in HDD.
➢
[Week day] There are eight options: ranges from Saturday to Sunday and all.
➢
[Record Type] Please check the box to select corresponding record type. There are two types:
Regular/Detect (Motion Detect).
➢
Period: Create time period according to record schedule and record type.
Figure 4.34
54
Advertisement
Table of Contents
