Table of Contents
Advertisement
3.4.
Set/Reset Password
3.4.1. Set Password
For your own safety, please set your administrator default password after you first boot up the
device.
After system booted up, you can see the following interface if it is your first time to use or you have
restored default setup. See. Please input a password and then input again to set a password. See in
Figure 3.3
•
You can set security questions here to reset the password in case you forgot. System
supports customized setup. Please note you need to set two security questions at the same
time. When you reset the password, you need to answer these two security questions too.
See in Figure 3.4
•
For reset information, please refer to Chapter 3.4.2
Figure 3.3
Figure 3.4
12
Advertisement
Table of Contents
