Table of Contents
Advertisement
5.9.1.2.
Here you can view device property information. The setups become valid immediately after you set. Image
interface is shows as in Figure 5.12.
Please refer to the following sheet for detailed information.
Parameter
Channel
Period
Brightness
Contrast
Image
Please select a channel from the dropdown list.
It divides one day (24 hours) to two periods. You can set different
hue, brightness, and contrast for different periods.
It is to adjust monitor window brightness. The default value is 50.
The larger the number is , the bright the video is. When you input the
value here, the bright section and the dark section of the video will
be adjusted accordingly. You can use this function when the whole
video is too dark or too bright. Please note the video may become
hazy if the value is too high. The value ranges from 0 to 100.The
recommended value ranges from 40 to 60.
It is to adjust monitor window contrast. The value ranges from 0 to
100. The default value is 50.
The larger the number is, the higher the contrast is. You can use this
function when the whole video bright is OK but the contrast is not
proper. Please note the video may become hazy if the value is too
Figure 5.12
Function
85
Advertisement
Table of Contents
