Table of Contents
Advertisement
Please refer to the following sheet for detailed information.
Parameter
Enable
Period
Interval
Sensitivity
Figure 5.36
You need to check the box to enable/disable tampering function. Please
select a channel from the dropdown list.
Tampering function becomes activated in the specified periods. See
Figure 5.35.
There are six periods in one day. Please draw a circle to enable
corresponding period.
Click OK button, system goes back to Tampering interface; please click
save button to exit.
System only memorizes one event during the anti-dither period. The
value ranges from 5s to 600s.
There are six levels. The sixth level has the highest sensitivity.
Function
106
Advertisement
Table of Contents
