NTP Server IP
Port
Interval
5.9.5.2.
Display Interface is shown as in Figure 5.45.
Please refer to the following sheet for detailed information.
Parameter
Resolution
Transparency
Time Display /
Channel Display
You can set the time server address.
It is to set the time server port.
It is to set the sync periods between the device and the time server.
Display
Function
There are four options: 1920×1080, 1280×1024, 1280×720, and 1024×768
(Default). Please note the system needs to reboot to activate current setup.
Here is for you to adjust transparency. The value ranges from 10 to 100.
Check the box here, you can view system time and channel number on the
monitor video.
Figure 5.45
115