Table of Contents
Advertisement
Bit Rate Type
Image Quality
Bit Rate
I Frame
Audio/Video
Enable
5.9.1.3.2.
The storage path interface is shown as in Figure 5.14.
Here you can set snap image saved path (
(
in the preview interface). Please click the Save button to save current setup.
System supports two types: CBR and VBR. In VBR mode, you can set
video quality.
There are six levels ranging from Lowest to Highest. The sixth level
has the highest image quality
Recommended bit rate value according to the resolution and frame
rate you have set.
Here you can set the P frame amount between two I frames. The
value ranges from 1 to 150. Default value is 50.
Recommended value is frame rate *2.
You can enable or disable the video/audio.
Path
in the preview interface) and the record storage path
Figure 5.14
88
Advertisement
Table of Contents
