Table of Contents
Advertisement
Note:
⚫
System cannot open config backup interface again if there is backup operation in the process.
⚫
System refreshes device when you go to the config backup every time and set current directory
as the root directory of the peripheral device.
⚫
If you go to the configuration backup interface first and then insert the peripheral device.
4.2.
Information
4.2.1.
Info
4.2.1.1.
HDD info
Display the hard disk information, including HDD info. HDD info interface is shown as in Figure 4.43
Figure 4.42
Figure 4.43
60
Advertisement
Table of Contents
