Table of Contents
Advertisement
Parameter
Record channel
Delay
PTZ Activation
Tour
Show message
Send Email
Alarm upload
Buzzer
FTP
Log
5.9.3.2.
It includes two types: HDD and Network Error.
•
HDD includes: No disk, disk error, disk no space.
•
Network includes: Net Disconnection, IP conflict, and MAC conflict .
5.9.3.2.1.
The HDD Error interface is shown as in Figure 5.37.
System auto activates selected channels to record once an alarm occurs
System can delay the record for specified time after alarm ended. The
value ranges from 10s to 300s.
Here you can set PTZ movement when alarm occurs. Such as go to
preset X. See Figure 5.36.
You need to check the box here to enable this function. System begins
1-wiindow or multiple-window tour display among the channel(s) you
set to record when an alarm occurs.
System can pop up a message to alarm you in the local host screen if
you enabled this function.
If you enabled this function, System can send out an email to alert you
when an alarm occurs.
System can upload the alarm signal to the server (Including alarm
server.
Check the box here to enable this function. The buzzer beeps when an
alarm occurs.
Expressed alarm occurs if the selected channel or video capture channel,
the video file up to a FTP server.
Check the box here, system can record tampering event log.
Abnormality
HDD Error
Function
107
Advertisement
Table of Contents
