Table of Contents
Advertisement
CAUTION:
•
Do not make objects fall to vigorously shake the device or equipment, and to place the device away from
the presence of magnetic interference. Avoid installing the surface vibration or vulnerable areas (ignore
this may damage the device).
•
Installed may not be exposed to rain or very humid areas.
•
Avoid placing the device in direct sunlight place, or poorly ventilated location, or near a heat source such
as a heater or heating, etc. (ignore this may cause a fire hazard).
•
In order to avoid damage to the camera, do not have the camera set up in smoke or
•
Steam, the temperature is too high or there is a lot of dust in the workplace.
•
When cleaning, use a soft cloth to wipe off the dirt on the housing. When cleaning up dirt, dry cloth
should be cleaned when the dirt is hard to remove, use neutral detergent gently wipe clean, do not use
alkaline detergents. If there is sticky dust on the lens, use a special lens paper wipes.
iii
Advertisement
Table of Contents
