4.1.3.
Network
4.1.3.1.
TCP/IP
The single network adapter interface is shown as in Figure 4.20
•
[Net Card] To select Network connection mode Wired or wireless. By default is Wire Netcard.
•
[DHCP Enable] The Device is connected to the router which DHCP is open, then device will
automatically obtain an IP address. By default DHCP enable.
•
[IP Address] The IP address of the device is used to login network, the default is: 192.168.1.240.
•
[Subnet Mask] Set the device's subnet mask, to be consistent with the login computer, default
is 255.255.255.0.
•
[Default Gateway]: Set the default gateway of the device, to be consistent with the login
computer, the default is 192.168.1.1.
•
[DNS Server]: Set the device's DNS server, to be consistent with the login computer.
•
[TCP port]: Set the camera's TCP port, the default port is: 25001.
•
[HTTP port]: Set the device's HTTP port, the default port is: 80.
•
[LAN Download] System can process the downloaded data first if you enable this function. The
download speed is 1.5X or 2.0X of the normal speed.
•
[Transfer Model] Set the network transmission strategies, Adaptive / Quality Preferred/
Fluency Preferred.
•
[RTSP] Set the device's RTSP port, the default port is: 554.
Figure 4.20
45