Table of Contents
Advertisement
5. Web Operation
Slightly difference may be found in the interface due to different models.
5.1.
Network Connection
Before web client operation, please check the following items:
⚫
Network connection should be proper.
⚫
DVR (WITHOUT HDD) and PC network setup is proper. Please refer to network setup (Main Menu →
Setting → Network)
⚫
Use order ping ***.***.***.*** (* DVR IP address) to check connection is OK or not. Usually the
return TTL value should be less than 255.
⚫
Current series product supports various browsers such as Safari, fire fox browser, Internet Explorer.
Device supports multiple-channel monitor, PTZ control, DVR parameter setup on the Apple PC.
5.2.
Login
Open IE and input DVR address in the address bar. For example, if your DVR IP is 192.168.1.240, then
please input
http://192.168.1.240
System pops up warning information to ask you whether Install control or block. Please click Install button.
See Figure 5.1.
After installation, the interface is shown as below. See Figure 5.2.
Please input your user name and password.
Default factory name is admin and password is admin.
Note: For security reasons, please modify your password after you first login.
in IE address bar.
Figure 5.1
74
Advertisement
Table of Contents
