Ptz Channel; Ptz Protocol; Ptz Baud Rate; Ptz Data Bit - CP Plus 4/8/16 Channel DVR User Manual

5.7.1 PTZ Channel

This is the channel that PTZ is connected to.

5.7.2 PTZ Protocol

From this field, select the PTZ device protocol. It must be consistent with the protocol of the
actual PTZ cameras installed. There are two available options: Pelco-D and Pelco-P. The
changes will take effect after clicking "

5.7.3 PTZ Baud Rate

Select the PTZ device baud rate. It must be consistent with the baud rate of the actual PTZ
cameras installed. This system supports four options: 1200, 2400, 4800 and 9600. The changes
will take effect after clicking "

5.7.4 PTZ Data Bit

The options for the PTZ Data Bit are "5", "6", "7" and "8". The default setting is "8".

5.7.5 PTZ Stop Bit

The PTZ Stop Bit options are "1" and "2". The default setting is "1."

5.7.6 PTZ Parity

The PTZ parity options are: "None", "Odd", "Even", "Mark" and "Space". The default setting
is "None."

5.7.7 PTZ Address

In this field, select the PTZ device ID. It must be consistent with the ID of the actual PTZ
cameras installed. Choose any number from 1 to 255, but note that this is not the same as the
number of the channel to which the PTZ camera is connected in the DVR system. The changes
will take effect after clicking "
Note that the abovementioned channel setting must match the settings of the PTZ camera.
Note: When making changes to PTZ camera functionality /
settings, make sure that these changes are being made to actual
PTZ cameras by selecting the correct number in the previous
field (Camera Channel).

6. Web Browser Operation

6.1 Feature

Install the software through the Internet browser of OS to conveniently operate the network
from a remote location. This DVR supports C/S, B/S, and access in LAN and WAN. It also
supports IP and domain name visiting.
IMPORTANT! SOFTWARE RECOMMENDATIONS：
" to save the changes and exiting the menu.
" to save the changes and exiting the menu.
" to save the changes and exiting the menu
50