Set Up The Storage Plan - CP Plus CP-RMC-D12 User Manual

Name
Auto/Manual/Stop
Enable/Disable
Step 3 Click Apply.

4.3.5 Set up the storage plan

Configure recording schedule and snapshot storage according to the actual application
scenarios. The Device starts corresponding types of recording and snapshot within a period
of configured time.
4.3.5.1 Configuring Recording Schedule
The default recording setting is 24 hours general recording for all channels. You can
configure conducting various recording types in any recording time.
Step 1 Select Storage > Schedule > Record under the main menu.
The Record interface is displayed. See Figure 4-13.
Configure TCP/IP parameters. For details, see Table 4-6.
Step 2
Description
Select the recording mode, including Manual, Auto, and Stop
Manual: Top priority. When the Manual check box is
selected, the system keeps general recording for 24 hours
for the corresponding channel
Auto: The system starts recording according to the record
type (such as general alarm, motion detect, and system
alarm) and recording time
Stop: Do not record
Enable or disable the scheduled snapshot for the corresponding
channels
Figure 4-13 Record Plan