Configuring Display Output - CP Plus CP-RMC-D12 User Manual

Step 2 Configure TCP/IP parameters. For details, see Table 4-26.
Name
Reset
Password
Mobile phone
push
CGI
Audio and
Video
Transmission
Encryption
Step 3 Click Apply.

4.6.7 Configuring display output

Configure display output parameters, including resolution, tour settings, TV adjustment, and
video mirror.
Figure 4-81 System service
Table 4-26 Description of system service parameters
Description
After this function is enabled, you can reset a new login password of the
admin account if the old one is lost. The system enables this function by
default.
NOTE
When the Password Reset function is disabled, the password can only be
reset through the password protection question in the local interface.
Make sure that the password protection question is set.
When this function is enabled, the device can push the triggered alarm
snapshot to the mobile phone. The system enables this function by
default.
When enabled, the device can interface with other devices through CGI
protocol. The system enables this function by default.
When enabled, the transmitted audio and video can be encrypted.
NOTE
Video decryption should be provided by supporting device or software.