Setting
Configure Monitor
Resolution
Related Links
Configure a Touch Monitor
Configure Dual Monitor Display Settings
Configure a Touch Monitor
In a dual-monitor setup, you must configure the touch monitors to work with your G7500 system.
Note:
Touch monitors in single-monitor setups don't require configuration.
Procedure
1. Do one of the following:
▪
In a call: Go to Menu
▪
Out of a call: Go to Menu
2. On each screen, tap the Hand
3. Tap Finish Configuration.
Related Links
Configure Monitor Settings
Configure Dual Monitor Display Settings
Polycom, Inc.
on page 78
on page 95
> More
> Settings
> Settings
icon.
on page 77
on page 95
Configuring Video and Camera Settings
Description
Specifies monitor settings.
▪
Automatic: (Default) Detects the highest-
supported resolution of the connected monitors.
When you select this option, the Resolution
setting is disabled.
▪
Manual: You can choose the monitor
Resolution.
▪
Off: Disable this monitor (not available for
Monitor 1).
Note: To use 4K resolution, make sure you set
Monitor 2 to Off.
Specifies the monitor resolution. This setting is
unavailable when you select Automatic for the
Configure Monitor setting.
Note: The system uses the resolution you select
even if the monitor doesn't support it. There is no
dynamic resolution adjustment in this situation.
> Diagnostics > Touch Configuration.
> Diagnostics > Touch Configuration.
78