Configure 3.5 Mm And Hdmi Audio Input - Polycom G7500 Administrator's Manual

2. Connect the other microphone(s).
Related Links
System Back Panel Ports
Specify a Different Primary Microphone
If you want to change the primary microphone you're using for Polycom Acoustic Fence technology, you
must first disconnect all the microphones from your G7500 system.
Note: If you use a mix of table and ceiling microphones, the primary microphone must be a table
microphone. The primary microphone can be a ceiling microphone if you use only that type of
microphone.
Procedure
1. Disconnect all microphones from the LLN ports
2. Reconnect the microphone you want to be the primary.
Your primary microphone is set up.
3. Connect the other microphone(s).
Your system is ready to use Polycom Acoustic Fence with a new primary microphone.

Configure 3.5 mm and HDMI Audio Input

You can configure the audio input settings for your G7500 system.
Procedure
1. In the system web interface, go to Audio/Video > Audio > Audio Input.
2. Configure the following settings (your changes save automatically):
Settings vary depending on the audio input source.
Setting
Audio Input Level
Polycom, Inc.
on page 10
Configuring Audio Settings
on the back of your system.
Description
Sets levels for the left and right channels. Choose a
value from 0 to 10 .
73