Wireless Devices - Polycom G7500 Administrator's Manual

Wireless Devices

The G7500 system includes Wi-Fi and Bluetooth wireless communication options so your users can
discover the system on the network with the Polycom Content App or their AirPlay- or Miracast-certified
device. Your remote control also connects to the system using Bluetooth.
You can enable or disable these features as needed.
Wireless Band for Miracast-Certified Devices
Miracast-certified devices must use the 5 GHz band to connect with the G7500 system (using 802.11
channel 44 by default).
Note: If you enable Wi-Fi, the system uses the same 802.11 channel for Miracast-certified device
connections.
Disable Wireless Options
You can disable the wireless features on your G7500 system. Wireless features are enabled by default.
Remember the following when disabling wireless features:
▪ Disabling wireless connectivity turns off screen mirroring with Miracast-certified devices and
prevents the system from using Wi-Fi to connect to a secondary network.
▪ Disabling Bluetooth turns off screen mirroring with AirPlay-certified devices and prevents those
devices and the Polycom Content App from automatically discovering your G7500 system. (You can
still connect with the Polycom Content App using the system IP address.)
▪ Disabling Bluetooth also disables your remote control.
Procedure
1. In the system web interface, go to Security > Wireless Security.
2. Do one of the following:
▪ Clear the Enable Wireless Connectivity check box.
▪ Clear the Enable Bluetooth check box.
Related Links
Default Options for Sharing Content
Polycom Bluetooth Remote Control
Polycom, Inc.
on page 93
on page 18
Configuring Network Settings
40