Configure The Recent Calls List; Clear Recent Calls - Polycom G7500 Administrator's Manual

Setting
Preferred Speed for Placed Calls
Maximum Speed for Received Calls

Configure the Recent Calls List

You can display recent calls on the Place a Call page in the G7500 system web interface.
The recent calls list includes the following information:
▪ Name or number
▪ If the system placed or received the call
▪ Date and time
Procedure
1. In the system web interface, go to Call Configuration > Recent Calls.
2. Configure the following settings (your changes save automatically):
Setting
Call Detail Report
Enable Recent Calls
Maximum Number to Display

Clear Recent Calls

You can clear the recent calls list from the G7500 system web interface.
Procedure
1. In the system web interface, go to Call Configuration > Recent Calls.
2. For Clear Recent Calls, select Clear and confirm your choice.
Polycom, Inc.
Description
Determines the IP call speed your system uses
when either of the following occurs:
▪ A user sets the call speed to Auto on the Place
a Call screen.
▪ A user places a call from the directory.
If the far-site system doesn't support the selected
speed, the system automatically negotiates a lower
speed.
The system doesn't receive calls at a higher rate
than the speed you set here.
Description
Call detail records (CDRs) are in the system logs.
When disabled, the system doesn't write call
information.
Specifies whether to show recent calls on the local
interface and the system web interface.
The maximum number of calls the system displays
in the recent calls list.
Configuring Call Settings
68