Polycom G7500 Administrator's Manual page 90

Setting
Server Address
Server Port
Base DN (Distinguished Name)
Multitiered Directory Default Group DN
Authentication Type
Bind DN (Distinguished Name)
Use SSL (Secure Socket Layer)
Domain Name
User Name
Password
4. Select Save.
Related Links
Configure Minimum TLS
LDAP Directory Server Ignores the Minimum TLS Version Setting
Polycom, Inc.
on page 56
Description
Specifies the address of the LDAP directory server.
When provisioned, this setting is read-only.
Specifies the port for connecting with the LDAP
server. When provisioned, this setting is read-only.
Specifies the top level of the LDAP directory where
searches begin. When provisioned, this setting is
read-only.
To avoid LDAP registration issues, make sure the
base DN is at least one level deeper than your
domain. For example, enter
ou=users,dc=example,dc=com
dc=example,dc=com .
Specifies the top-level group of the LDAP directory
required to access its hierarchical structure. When
provisioned, this setting is read-only.
Specifies the protocol for authenticating with the
LDAP server: NTLM, Basic, or Anonymous.
Specifies the bind DN when using basic
authentication. Available only when you set
Authentication Type to Basic. When provisioned,
this setting is read-only.
When enabled, encrypts data to and from the
LDAP server.
Specifies the domain name for registering with the
LDAP server.
Specifies the user name for registering with LDAP
server.
Specifies the password for registering with the
LDAP server.
on page 120
Setting Up a Directory
instead of
88