Configure Network Quality Settings - Polycom G7500 Administrator's Manual

Setting
Username
Password
IP Address
Your IP Address Is
Subnet Mask
Default Gateway
DNS Server
DNS Alternate Server
When you connect, you receive a Successfully connected to <your network's SSID name>
message.

Configure Network Quality Settings

You can specify how your G7500 system responds to network quality issues by controlling how your
network handles packets during video calls.
Procedure
1. In the system web interface, go to Network > Primary Network > Network Quality.
2. Configure the following settings:
Polycom, Inc.
Description
Specifies the login user name for WPA-Enterprise (802.1xEAP).
Specifies the login password for WPA-Enterprise (802.1xEAP).
Select one of the following to set your system Wi-Fi network IP address:
▪ Obtain IP address automatically (You must have a DHCP server in your
environment to use this option.)
▪ Enter IP address manually
Specifies the IP address for the Wi-Fi network.
This setting is read-only if your system gets its IP address automatically.
Specifies the subnet mask address for the Wi-Fi network.
This setting is read-only if your system gets its IP address automatically.
Specifies the IP gateway for the Wi-Fi network.
This setting is read-only if your system gets its IP address automatically.
Specifics the DNS server address for the Wi-Fi network.
This setting is read-only if your system gets its IP address automatically.
Specifics the alternate DNS server address for the Wi-Fi network.
This setting is read-only if your system gets its IP address automatically.
Configuring Network Settings
32