Check Provisioning Results; Logs; Consolidated System And Peripheral Device Logs - Polycom G7500 Administrator's Manual

LED Status Indicators for the G7500 System LAN Ports
Indicator
Off
Solid green
Blinking green
Solid orange
* - The right LED is not used on the primary network connection port (farthest left on the back of the
system).
Related Links
Configuring Wired LAN Settings
Related Links
System Back Panel Ports

Check Provisioning Results

To verify your settings are provisioned the way you want, you can see if the configuration parameters
were applied successfully to your G7500 system.
Make sure your system is registered with a provisioning service, such as RealPresence Resource
Manager.
Procedure
1. In the system web interface, go to Servers > Provisioning Server.
2. Select Show Results to verify that the configuration parameters applied successfully the last time
you provisioned your system.
If provisioning failed for a parameter, there are details in the Error Message column to help you fix
the issue.
Related Links
Register the System with a Provisioning Service

Logs

Logs contain information about G7500 system activities and configurations to help you troubleshoot
issues.

Consolidated System and Peripheral Device Logs

Logs include details about your G7500 system and some of its connected peripheral devices.
These peripheral devices include the following:
• Polycom IP Table Microphone
• Polycom IP Ceiling Microphone
Polycom, Inc.
Left LED Status (Network Traffic)
No connection
Connected with no traffic
Connected with traffic
N/A
on page 27
on page 10
on page 25
Troubleshooting
Right LED Status (Power)*
No device connected
Connected and functioning normally
N/A
Connected but malfunctioning
113