Polycom G7500 Administrator's Manual page 110

Setting
Read-Only Community
Contact Name
Location Name
System Description
User Name
Authentication Algorithm
Authentication Password
Privacy Algorithm
Privacy Password
Engine ID
Listening Port
Polycom, Inc.
Description
Specifies the SNMP community string for your
system. For security reasons, don't use the default
community string (public).
Note: Polycom doesn't support SNMP write
operations for configuring or provisioning systems.
The community string is for read operations and
outgoing SNMP traps.
Specifies the name of the person responsible for
remotely managing the system.
Specifies the system location.
Provides details about the system.
Specifies the User Security Model (USM) account
name for SNMPv3 message transactions. The
maximum length is 64 characters.
Specifies the type of SNMPv3 authentication
algorithm used.
▪ SHA
▪ MD5
Specifies the SNMPv3 authentication password.
The maximum length is 48 characters.
Specifies the cryptographic privacy algorithm for
SNMPv3 packets.
▪ CFB-AES128
▪ CBC-DES
Specifies the SNMPv3 privacy (encryption)
password. The maximum length is 48 characters.
Specifies the unique ID of the SNMPv3 engine. You
might need this information to match the
configuration of an SNMP console application. The
ID is automatically generated, but you can create
your own as long as it is between 10 and 32
hexadecimal digits. You can separate each group
of two hex digits by a colon (:) to form a full 8-bit
value. A single hex digit delimited on each side with
a colon is equivalent to the same hex digit with a
:F:
leading zero (for example,
0f:
).
The ID can't be all zeros or Fs.
Specifies the port SNMP uses to listen for system
messages (the default is port 161).
System Maintenance
:
is equivalent to
108