Configure System Access Settings - Polycom G7500 Administrator's Manual

Setting
Active Directory Admin Group
Active Directory User Group
4. Select Save.

Configure System Access Settings

You can configure how you access your G7500 system.
Procedure
1. In the system web interface, go to Security > Access.
2. Configure the following settings:
Setting
Enable Network Intrusion Detection System
(NIDS)
Enable Web Access
Allow Access to User Settings
Restrict to HTTPS
Web Access Port (HTTP)
Enable Diagnostics Port Idle Session Timeout
Polycom, Inc.
Description
Specifies the Active Directory group whose
members should have administrator access to the
system. This name must exactly match the name in
the Active Directory server for successful
authentication.
Specifies the Active Directory group whose
members should have user access to the system.
This name must exactly match the name in the
Active Directory server for successful
authentication.
Description
When you enable this setting, the system creates
security log entries when it detects a possible
network intrusion.
Specifies whether you can access the system using
the system web interface.
Specifies whether users can access the User
Settings screen through the local interface.
Specifies that you can access the system web
interface only over port 443. Enabling this setting
closes access through port 80 (HTTP).
Specifies the port to use when accessing the
system web interface over HTTP.
If you change the default (port 80), specify port
1025 or higher and make sure it is not already in
use. You must include the port number with the IP
address when you use the system web interface to
access the system.
(This setting is unavailable if Restrict to HTTPS is
enabled.)
Specifies whether to allow the diagnostics port to
time out at the configured time interval or not. You
set the timeout at Idle Session Timeout in
Minutes.
Securing the System
45